SEBO 9254AM ET-C 14" Power Head
Deep clean your carpet with a SEBO power head!
The SEBO ET-C Power Head is designed specifically for use with the SEBO C3.1 and K3 canister vacuum cleaners. These vacuums are among the most technically advanced canister vacuum cleaners in the world.
For example, the ET-C Power Head has warning systems and automatic shut-off capabilities that are designed to alert the user to machine problems that, if ignored, will damage the machine or diminish performance.
SEBO power heads are virtually maintenance free, and the electronic overload protection feature extends belt life by automatically shutting off power if a brush roller jam occurs.
- Your SEBO ET-C Power Headís most unique features are:
- Deep Cleaning: SEBO power heads offer deep cleaning of your carpets only a thorough brushing can give.
- Wider L-shaped Head: The wider head allows for optimal cleaning and maneuverability around furniture and under cabinets, and the extension side of the head cleans and brushes right to the edge.
- Brush Strip Instead of a Brush Roller: The brush strip for the ET-C slides in and out for fast and easy replacement.
- Brush Information Panel: Located on the top of the power head is a brush information panel with two lights and a quick-reference area that will tell you what the illuminated lights indicate.
- Electronic Overload Protection: If the brush is jammed, the red "BRUSH CONTROL" light will illuminate and the vacuum will automatically shut off.
- Brush Deterioration Warning: The red AND green "BRUSH CONTROL" lights will illuminate (after a 10 second delay) to notify the user that the brush strip is too worn and, therefore, should be replaced. The lights will remain illuminated until the worn brush strip is replaced, but the machine will continue to operate in the meantime. Both lights may also illuminate if the brush doesnít find enough resistance; for example, when the power head is lifted from the floor or is used on hard floors.
- Stationary Use: When the machine has its handle in the upright-locked position, it is designed to shut off the brush roller. Both brush control lights will be off. An operating power head should not stand stationary on the floor for inappropriate periods of time.
- brush motor: 150 watts, 1.4 Amps
- width: 14"
- weight: 6 lbs.
- brush width: 12"
- brush strip: replaceable
- brush drive: toothed belt with electronic overload protection
- protection: double insulated